Custom Medals And Pins

How To Attach Enamel Pin

Over the past few years, enamel pins have seen significant growth in popularity as a type of fashion item.

These pins are available in a plethora of designs and aesthetics, ranging from charming and quirky to sophisticated and elegant in both appearance and design.

When it comes to wearing enamel pins, knowing how to properly attach them is one of the most crucial things you can learn.

In this piece, we will discuss a variety of techniques for affixing enamel pins in a manner that will ensure they do not become loose over time.

Method 1: The Rubber Clutch

The rubber clutch is the attachment mechanism that is used for enamel pins more frequently than any other. It is a circular piece of rubber that is very small and may be put onto the rear of the pin. The rubber clutch wraps itself securely around the pin post and maintains the position of the pin as a result.

In order to attach an enamel pin utilizing a rubber clutch, the following steps need to be followed:

Position the pin so that it will go through the fabric at the desired attachment point.To attach the rubber clutch to the pin, slide it onto the post.

When you get it where you want it, push the clutch up toward the back of the pin so that it is flush on the fabric.

Attaching enamel pins can be done in a quick and efficient manner by using a rubber clutch. It is simple to remove and reposition the pin whenever it is necessary, despite the fact that it maintains the pin in a secure position.

Method 2: The Butterfly Clutch

Another common way for attaching enamel pins is by using a butterfly clutch, which is also sometimes referred to as a military clutch. It is a piece of metal with two little wings that fold over the pin post in order to secure the pin in its position.

The following procedures need to be taken in order to successfully attach an enamel pin using a butterfly clutch:

Position the pin so that it will go through the fabric at the desired attachment point.

One hand should be used to keep the pin in position while the other should be used to fold the butterfly clutch’s wings over the pin’s post.

When you get it where you want it, push the clutch up toward the back of the pin so that it is flush on the fabric.

The butterfly clutch is a secure attachment mechanism that is frequently used for enamel pins that are either particularly costly or particularly heavy. Although it is more challenging to remove than the rubber clutch, it gives a firmer grasp on the object.

Method 3: Safety Pin

Using a safety pin to secure enamel pins is a straightforward and time-honored method. However, this method is not advised for use with heavy or precious pins because it poses a risk of damaging either the pin or the fabric.

Follow these procedures to successfully attach an enamel pin utilizing a safety pin:

When you get to the spot on the fabric where you wish to connect the pin, poke the safety pin through it.

Just thread the loop of the safety pin through the opening in the enamel pin.

When the safety pin is closed, you can check to see sure the enamel pin is firmly attached.

Although while the safety pin is a straightforward and inexpensive way of connection, it is not the safest or most dependable choice. It is recommended that you only use this procedure for pins that are not particularly valuable and are light in weight.

Method 4: Using a Magnetic Backing

Enamel pins are typically fastened with a magnetic back, which is a contemporary attachment method that is gaining in popularity. It is a two-piece combination that consists of a magnet and a metal component that fastens to the rear of the pin. The magnet may be attached to almost anything.

The following actions need to be taken in order to successfully attach an enamel pin with a magnetic back:

Position the metal piece so that it will go through the cloth at the location where the pin will be attached.

Keep the enamel pin in place, and then position the magnet such that it is adhered to the pin’s reverse side.

The magnet will attach to the metal component, which will then keep the pin in a safe and secure position.

The magnetic back provides a way of attachment that is not only reliable but also simple to use. On the other hand, you should avoid using it for pins that are very heavy or precious because the magnet might not be powerful enough to keep them in place.

Advice and Safety Measures

In addition to the procedures that have been outlined above, there are a number of helpful hints and measures that can be taken to guarantee that your enamel pins will remain firmly attached. The following are some important considerations to keep in mind:

Avoid over-tightening

Indeed, and in that spirit, I’ll provide the following additional recommendations and safety precautions:

It is important not to overtighten the clutch or butterfly clutch because doing so can harm the pin or make it more difficult to remove in the future.

When mounting enamel pins, especially those that are heavy or precious, exercise caution. You might want to think about utilizing a more robust attachment method such as the butterfly clutch or the magnetic back.

When attaching enamel pins, avoid using glue or tape because doing so can damage the pin or the fabric, and it also could not hold securely.

To guarantee a safe and secure grasp, clean the pin as well as the area where it will be attached before proceeding.

Pins made of enamel should be kept in a protected location, such as a pin board or a box, to avoid being damaged or lost.

While using enamel pins, you need to be careful not to poke holes in delicate textiles or leave marks on the surface of the cloth.

While deciding on a method of attachment, you should take into account the weight of the enamel pin. It’s possible that a rubber clutch or a safety pin will work just fine for lighter pins, but heavy pins could need a butterfly clutch or a magnetic back instead.

It is important to keep in mind that different textiles could call for a different way of attachment. For example, a butterfly clutch, as opposed to a rubber clutch, may be necessary for holding the pin securely in place when working with heavier textiles.

In addition to the methods of attachment and helpful hints that have been shown thus far, it is essential to give careful consideration to the layout and design of enamel pins. You can use enamel pins to show support for a cause or express your own sense of style, and you can fasten them to a broad variety of products, such as clothing, purses, caps, and more.

When deciding where on an object to attach a pin, you should take into account not only the overall design and balance of both the item and the pin, but also the location of any other pins or accessories that may be present.

Affixing enamel pins is a straightforward operation that, when done correctly, may provide a wacky and one-of-a-kind quality to your sense of personal style. You can make sure that your enamel pins stay securely in place and look wonderful if you follow these suggestions and choose the attachment method that is suited for both your pin and the fabric you’re using.

Whether you are an experienced pin collector or are just beginning your journey into the world of enamel pins, the following advice can assist you in making the most of your collection and ensuring that you will continue to enjoy your pins for many years to come.

a Free
Quote Now